Home › District of Columbia › Washington
Trusted Washington window installers, free in-home quotes, licensed & insured pros, workmanship warranty.
Window installation in Washington, DC answers to a real four-season climate. Summers turn hot and sticky, with highs near 88 degrees and thick humidity off the Potomac. Winters drop to around 30 degrees with cold, damp wind. Old windows let heat escape in January and let the sun cook your rooms in July.
Much of DC's housing is older than the national average. Think Capitol Hill rowhouses, Georgetown's Federal-style brick homes, and the apartments and flats around Dupont Circle and Adams Morgan. A lot of them still have original single-pane or early double-pane sash. You feel it as drafts, high power bills, and street noise. New windows knock out all of it.
Licensed, trained, background-checked crews do every install. No day-labor subs showing up at your door.
You get a line-item written quote up front. The price you sign is the price you pay, no surprise fees.
Your installer pulls and manages any permits through the DC Department of Buildings, including Historic Preservation Review Board approval when your home needs it.
If anything goes wrong with the workmanship, your installer comes back and fix it, backed by the manufacturer warranties too.
Every style, built for Washington's climate.
Two sashes that slide up and down, easy to clean and a natural match for Capitol Hill rowhouses.
Hinged at the side and crank-open, they give you strong airflow and a tight seal against winter wind.
Glides side to side on a track, a simple fit for wide openings and clear Potomac-side views.
One large fixed pane that pulls daylight deep into a room without any drafts.
Projecting multi-panel windows that add floor space and real curb appeal to a brick facade.
Top-hinged awnings vent during a DC rain shower, and garden windows add a sunny plant shelf.
For Washington's four-season climate we most often install vinyl or fiberglass frames with Low-E 180 (dual-season) glass.
Get a free, no-pressure recommendation for your Washington home, any style, any material.
From a single drafty window to a whole building, we serve homeowners and property owners across Washington and the wider DC metro.
We work on single-family homes, rowhouses, condos, and historic brick homes across the District. Your installer handles measurement, permits through the DC Department of Buildings, install, and cleanup.
We serve offices, retail storefronts, multi-family buildings, and HOAs. You get code-compliant glazing, low-disruption scheduling, and bulk pricing.
Residential or commercial, most Washington property types qualify. No deposit, no pressure.
Licensed & insured · Lifetime workmanship warranty · Reply in 1 business hour
Washington sits in climate zone 4A. That means cold winters and warm, humid summers, so your windows need to insulate against the cold while still holding back summer heat. Here is the setup we install on DC homes:
| Spec | Recommended for Washington | Why |
|---|---|---|
| Glass coating | Low-E 180 (dual-season) | insulates in winter, blocks heat in summer |
| Frame material | Vinyl or fiberglass | big temperature swings, 88°F summers to 30°F winters |
| Gas fill | Argon | better insulation against the heat |
| U-factor target | ≤ 0.28 | exceeds the District of Columbia energy code requirement for zone 4A |
| SHGC target | 0.30 | balanced for four-season comfort |
In Washington, U-factor is the spec that matters most. A lower U-factor keeps more heat inside on a cold, windy night and cuts your summer cooling load too. Local electricity runs about 19 cents per kilowatt-hour, so tighter windows trim both your winter heating and your summer AC bills every year.
Window installation in Washington usually runs $500 to $850 per installed window, or $9,000 to $17,000 for a full home. Rowhouse jobs on tight streets like Capitol Hill can cost a little more because of narrow access and street parking. Historic district work adds review time, which can affect scheduling. With local home values near $650,000, new windows are a smart place to put your money.
Get a free, no-pressure in-home quote today, licensed, insured, and backed by the installer's lifetime workmanship warranty.
We measure your openings in person and hand you a clear written estimate, no guesswork on a DC rowhouse.
Your windows are built to the exact size of each opening, so they fit older Washington frames right.
Most homes are done in a single day, and your installer pulls any permits through the DC Department of Buildings first.
We clean up, haul the old windows away, and register your warranty before we leave.
Washington requires a permit for most window replacement work. Standard jobs go through the DC Department of Buildings, which reviews the application for code compliance. If your home is in a historic district, you also need approval from the Historic Preservation Review Board before the permit is issued, and that applies even to swapping sash inside existing frames. Your windows must meet the 2017 DC Energy Conservation Code, based on the 2015 IECC. Your installer handles the paperwork and code compliance for you.
"Got three quotes in Washington. Theirs was the only one that explained the glass choice."
"The upstairs of our Capitol Hill place used to be unusable in summer. Not anymore."
"They worked around our schedule and finished the Dupont Circle job in a single visit."
Recent project: Full-home replacement in Georgetown, 20 Low-E 180 (dual-season) windows.
See what your project would cost, free, no-obligation in-home quote.
ZIP codes served: 20001, 20002, 20007, 20009, 20011, 20016
In most cases yes. The DC Department of Buildings requires a permit for window replacement. Homes in historic districts also need Historic Preservation Review Board approval first. We handle all of it.
For DC's mixed zone 4A climate, we recommend Low-E 180 dual-season glass with argon fill in vinyl or fiberglass frames, targeting a U-factor of 0.28 or lower.
Most DC jobs run $500 to $850 per installed window, or $9,000 to $17,000 for a full home. Rowhouse access and historic review can shift the total.
Local electricity runs about 19 cents per kilowatt-hour. On a typical home, energy-efficient windows save about $493 a year on the ENERGY STAR published figure for this climate zone, or about $253 if you are replacing older double pane on heating and cooling.
Yes, but the work needs Historic Preservation Review Board approval before the permit, and the design often has to match the original look. We prepare the review package and manage the process for you.
Yes. Every installer we match you with is licensed, bonded and insured in the District of Columbia, and their work carries a lifetime workmanship warranty from your installer alongside the manufacturer's warranty on the windows. We arrange your quote and the introduction; your installation contract is with the installer who does the work.
Free, no-pressure in-home estimate. No deposit to book. Satisfaction guaranteed.
