Trusted Yonkers window installers, free in-home quotes, licensed & insured pros, workmanship warranty.
Living on a hill above the Hudson puts real stress on your windows. Wind comes up off the river all winter, and January nights in Yonkers settle around 27 degrees. Summers push past 85 with heavy Westchester humidity. Window replacement in Yonkers has to seal tight in the cold first, then keep the July sun from cooking your rooms.
New York's third-largest city is built on steep slopes, and the housing shows it. You see prewar brick apartment buildings near Getty Square, two-family homes stacked into the hillsides in Ludlow, and leafy single-family blocks in Park Hill and Crestwood. A lot of that stock still carries original wood sash or early aluminum replacements. That means drafts near the river, Con Edison bills you dread, and traffic noise off the Saw Mill River Parkway. Good windows take care of all of it.
Licensed, trained, background-checked installers do the work. The same crew that measures your home is the crew that shows up on install day.
Pricing arrives in writing, broken out line by line. What you sign is what you pay, with no surprise charges for stairs or disposal.
We file with the City of Yonkers Department of Housing and Buildings, whether that is a Permit for Minor Alterations or a full Building Permit, and we make sure the egress and energy code details check out.
If the workmanship ever fails, your installer comes back and fix it for as long as you own the house. Manufacturer coverage sits on top of that.
Every style, built for Yonkers' climate.
Two sashes glide up and down and tilt in, the standard look on Yonkers two-family homes and prewar brick.
Hinged on the side and cranked shut against the frame, which seals well on hillsides facing Hudson wind.
Moves side to side on a track, an easy fit for wide openings and long river or valley views.
One big fixed pane, ideal where a Park Hill slope gives you something worth looking at.
Multi-panel units that push outward, adding a window seat and real curb appeal on a narrow lot.
Awnings tip open from the top so you can vent in rain; garden windows create a sunny herb shelf.
For Yonkers' cold-winter climate we most often install vinyl or fiberglass frames with Low-E 180 (high-insulation) glass.
Get a free, no-pressure recommendation for your Yonkers home, any style, any material.
One rattling window or an entire building, we take care of homeowners and property owners across Yonkers and Westchester.
We work on single-family houses, two-family homes, prewar apartments, townhomes, and condos from Getty Square up to Crestwood. Measuring, the Housing and Buildings permit, install, and cleanup are all on us.
Offices, retail storefronts, multi-family buildings, and HOA properties are all in our range. You get code-compliant glazing, scheduling that keeps tenants and customers undisturbed, and volume pricing.
Residential or commercial, most Yonkers property types qualify. No deposit, no pressure.
Licensed & insured · Lifetime workmanship warranty · Reply in 1 business hour
Yonkers falls in climate zone 4A, a cold-winter, humid-summer zone. Your windows need to insulate hard and still hold back summer heat gain, so aim at these specs:
| Spec | Recommended for Yonkers | Why |
|---|---|---|
| Glass coating | Low-E 180 (high-insulation) | maximizes winter insulation |
| Frame material | Vinyl or fiberglass | cold winters near 27°F, tight, draft-free seal |
| Gas fill | Argon | extra insulation against winter cold |
| U-factor target | ≤ 0.28 | exceeds the New York energy code requirement for zone 4A |
| SHGC target | 0.30–0.40 | lets in free winter solar heat |
U-factor does the heavy lifting up here. The lower it runs, the less heat escapes on a windy Hudson night, and hillside homes with exposed western walls feel that difference right away. Residential power in New York averages about 32.7 cents per kilowatt-hour in Westchester, well above the national average, so tighter glass shows up on your bill within the first season.
Window installation in Yonkers typically runs $470 to $810 per installed double-hung window, or $8,500 to $16,500 for a whole home. Steep driveways and narrow hillside streets can add a bit of labor, since crews sometimes carry glass up long stair runs instead of parking at the door. Two-family homes and prewar walk-ups may need extra staging for upper-floor openings. With Yonkers home values near $620,000, new windows are one of the few upgrades that pay you back in comfort, resale, and heating costs at the same time.
Get a free, no-pressure in-home quote today, licensed, insured, and backed by the installer's lifetime workmanship warranty.
We measure every opening at your Yonkers home and hand you a written, itemized price.
Your windows get built to the exact openings we measured, settled prewar frames included.
Most homes wrap in one day, and the Housing and Buildings permit is filed before we start.
We vacuum up, haul off the old sash, and register your warranties the same afternoon.
Yonkers is its own city with its own building department, so NYC Department of Buildings rules do not apply here. For a one-family or two-family home, you need a Permit for Minor Alterations if the job costs less than $7,500, or a full Building Permit at $7,500 or more. Architect or engineer plans are not required as long as the rough opening stays the same size, glass and open area are the same or greater, and at least one window per bedroom meets emergency egress. Change an opening size and plans get required. Your windows also have to meet the Energy Conservation Construction Code of New York State, and you submit the NFRC label data showing U-factor and SHGC with the application. We file everything with the City of Yonkers Department of Housing and Buildings so you never touch the paperwork.
"Two of our Getty Square windows had been painted shut for years. They open like new now."
"Got three quotes in Yonkers. Theirs was the only one that explained the glass choice."
"The upstairs of our Park Hill place used to be unusable in summer. Not anymore."
Recent project: Full-home replacement in Getty Square, 18 Low-E 180 (high-insulation) windows.
See what your project would cost, free, no-obligation in-home quote.
ZIP codes served: 10701, 10703, 10704, 10705, 10710
Yes. One and two-family homes need a Permit for Minor Alterations under $7,500, or a Building Permit at $7,500 and above. If your openings stay the same size, glass and open area are not reduced, and bedroom egress is met, no architect plans are needed. Your installer pulls the permit for you.
For zone 4A cold winters and humid summers, we install Low-E 180 high-insulation glass with argon fill in vinyl or fiberglass frames. Target a U-factor of 0.28 or lower and SHGC in the 0.30 to 0.40 range.
Most Yonkers projects land between $470 and $810 per installed double-hung window, or $8,500 to $16,500 for a full home.
Residential power in New York averages about 32.7 cents per kilowatt-hour in Westchester. On a typical Yonkers home, energy-efficient windows save about $493 a year on the ENERGY STAR published figure for this climate zone, or about $253 if you are replacing older double pane, plus lower gas heating costs in winter.
Yes. A two-family house follows the same one and two-family permit path as a single-family home. Three units and up counts as a multiple dwelling, which requires a Building Permit plus plans stamped by a New York State licensed architect or engineer. Your installer handles that filing and the code review.
Yes. Every installer we match you with is licensed, bonded and insured in New York, and their work carries a lifetime workmanship warranty from your installer alongside the manufacturer's warranty on the windows. We arrange your quote and the introduction; your installation contract is with the installer who does the work.
Free, no-pressure in-home estimate. No deposit to book. Satisfaction guaranteed.
